Tarp Sheet

What Size Tarp Sheet Do I Need?

So, you are going to purchase a new tarpaulin. You understand that you need a new tarp to cover something. However, the most important thing that you need to take care of is to make sure that you get the right size tarp. You also understand this point and don’t consider this point to be much more complex.

You think that all you need to do is measure the length and the width of the object that you want to cover with the tarpaulin sheet. To some extent the school of thought is right. If all you want to do is cover a floor or a wall then you don’t need to go into many complexities. Just take some measurements of the floor or the object you want to cover and purchase a tarp accordingly.

However, things are not that simple at all times. There are several three-dimensional things around us. Things become complicated when we have to cover one such thing. You can’t just take the width and length of the three-dimensional thing and buy a tarp accordingly. It is because the tarp sheet would be too small to cover the object fully.

So, when it comes to three-dimensional things there is much more to it than the eyes can capture. You need to be a bit more cautious when measuring such objects. However, the basic principle of taking measurements remains the same. You have to start by taking the measurements of the length and width of the top of the object.

You need to make sure that you cover the top of the object in its entirety. However, the things that we have to cover don’t always have a flat top. So, if the object that you want to cover doesn’t have a flat top then you need to make some considerations. You need to make estimates to cover all the things that are pointing upwards.

It is not possible to take an exact measurement of the objects that are pointing upwards. We have to make some estimates to cover those things as well. We suggest people make some over-estimation at that point. If you make an underestimation then chances are you would end up with a large Tarp Sheet that might not be able to cover the object.

If you end up with a small tarp then it might be able to cover the top of the object. However, it wouldn’t be able to go as far down the object as you require. So, the tarp wouldn’t be covering the object in its entirety, so, it would be exposed to the environment. If you overestimate then you would have a sheet that would go as far down as needed.

Once you have taken all the considerations about the top of the object, then you need to think about the sides of the object. You need to consider how far down you want the best Tarp Sheet to drape. You need to take some measurements but before you want to consider how much of the object you want to cover.

In the case of some objects, we want to cover only the top. A suitable example is a trailer. In the case of the trailer we only want to cover the top of the trailer to protect whatever we have put inside the trailer. We don’t care about the sides of the trailer as they are already covered. So, we don’t take the measurements of the sides.

However, if we want to cover a machine then we want to cover it in its entirety. In such conditions, we measure the sides of the machine as well. We start the measurement from the top of the object. Then we measure the point we want the tarp to drape over. This way we make sure that the Tarp Sheet covers the machine in its entirety.

Once we have measured one side we double it. It is because we have to cover both sides of the object. If we consider one side only then we would be left with a small tarp. Whatever number we get we have to add it to the length and width measurement of the object after doubling.

For instance, if we want the tarp to drape down 2 meters on an object, then we would consider all 4 sides of the object. Instead of adding 2 meters to the length and width, we would be adding 4 meters. This way we will consider all sides of the object.

Cut size

Before finalizing the size of the tarp we have to consider one other thing as well. We need to consider the cut size of the heavy weight tarpaulin sheet before we buy it. The cut size is the standard term of the industry. It means the size of the tarp before it is put into the final shape. A tarp needs to be seamed, hemmed, and eyeleted before it is used.

If you don’t consider these factors then you would end up with a short tarp. Chances are that the size of the tarp would be at least 30 centimeters shorter than what you need if you don’t consider these factors. So, you can consider these 30 centimeters as the error reading that you need to add to the final reading.

Once again we suggest that you consider overestimating the error factor. If you underestimate the error factor then you might end up with a small tarp. If the tarp is small then it would not be able to cover the object that it is meant to cover in its entirety. It is the last thing that most want.

So, it is wiser to go big and spend a little money than to end up with a tarp that is small and of no use to us. These are the factors that you need to keep in mind when buying a tarp. You would have peace of mind when ordering the tarp only if you consider these factors. Otherwise, you would have doubts about the size of the tarp till you receive it.

Leave a Reply

Your email address will not be published.